Completing The Connections; Connecting A Single System Drawer - Gateway 7250R Rack Mounting Instructions

Completing the connections

When the system drawer is installed in the cabinet, make the system
connections.
Important

Connecting a single system drawer

To connect the peripherals:
1
Turn off all system drawers and devices in the cabinet before attaching
any of the system drawer cables.
2
Connect all I/O device cables (keyboard, mouse, video, serial, and
parallel) to their respective ports on the back of the system drawer.
The system board connectors may appear different than in the
illustration, depending on your system board.
Mouse
Keyboard
A wide variety of system connections are possible. Your
actual system connections may be different from the
following examples.
To monitor or KVM tray
To printer
To power
source
Completing the connections
SCSI bus
Tape storage
drawer
KVM or
keyboard tray
15