Gateway 7400 Rack Mounting Instructions page 28

3
Connect all I/O device cables (keyboard, mouse, video, serial, and
parallel) to their respective ports on the back of the system drawer.
The system board connectors may appear different than in the
illustration, depending on your system board.
If connecting multiple system drawers, you must connect extender cables to
the system drawers used. You must also attach the peripherals to the
appropriate I/O ports on the back of the autoswitcher. Refer to the following
figure for connection details.
Tape storage drawer
SCSI channel 1
SCSI channel 2
7400
To power
Mouse
Keyboard
VGA video
signal
To printer
To power source
To printer
VGA video signal
Autoswitcher
To VGA
To power source
monitor
Keyboard and mouse tray
Mouse
Keyboard
Tape storage
drawer
SCSI channel 2
SCSI channel 1
QHSII storage
drawer
Completing the connections
QHSII storage
drawer
23