Attaching The Cables To The Retractor; Completing The Connections - Gateway 8400 Installation Manual

Attaching the cables to the retractor

To attach the cables:
1
Route the cables from the back of the system drawer to the cable retractor.
2
Attach the cables to the cable retractor, making sure the cables have
sufficient slack when the system drawer is pulled forward and pushed
back into place.
Cable retractor
3
Route the cables to their destinations and attach as necessary.
4
If necessary, bundle any excess cable.

Completing the connections

Now that the system drawer is installed in the cabinet, make the system
connections.
Important A wide variety of system connections are possible. Your
actual system connections may be different from the
following examples.
Cable
Completing the connections
21