Installing The Cabinet Mounting Rails Onto Gateway Brackets - Gateway 7400 Rack Mounting Instructions

4
Position the back mounting bracket (labeled REAR) on the back vertical
mounting rail.
5
Attach the back mounting bracket to the back vertical mounting rail
using two screws from the accessory kit.
6
Mount the second set of brackets on the opposite side of the cabinet by
repeating Steps 2 through 5.
Installing the cabinet mounting rails onto
Gateway brackets
To install the cabinet mounting rails onto Gateway brackets:
1
Align the back end of the cabinet mounting rail to the back mounting
bracket by sliding the inner rail forward (if the spring latch locks the inner
rail into place, free the rail by releasing the spring latch).
Inner rail
Front mounting
bracket
Front vertical
mounting rail
2
Attach the back end of the cabinet mounting rail to the back mounting
bracket using a screw from the accessory kit.
10
Installation
Spring latch
Back mounting
bracket
Back vertical
mounting rail