Table of Contents
Advertisement
To install the front panel assembly:
1
Remove the three screws securing the bottom panel to the server.
You may find it easier to remove the hinge from the front panel assembly,
attach the hinge to the server, then re-attach the front panel assembly
to the hinge.
2
Move the server forward until the front edge extends slightly beyond the
table or counter edge.
3
Align the front panel hinge screw holes over the bottom panel screw
holes.
4
Attach the front panel hinge with the three previously removed screws.
Bottom panel
screws
Front panel
5
Lift up the front panel, then attach the front panel to the server with
the four captive thumbscrews.
6
Installation
Front panel
hinge
Captive
thumbscrews
Advertisement
Table of Contents
