Connecting External Scsi Devices - Adaptec ARO-1130CA Installation And Hardware Manual

ARO-1130CA Installation and Hardware Guide
4
Attach the remaining connectors on the cable to the remaining
internal devices.
5
Connect an available DC power cable (from your computer's
power supply) to the power input connector on each SCSI
device.

Connecting External SCSI Devices

To install external SCSI devices, you will first need to install an inter-
nal-to-external SCSI port expansion kit. The kit usually consists of a
special cable that converts the internal SCSI connector on the mother-
board to an external SCSI connector on the chassis of your computer.
Refer to the expansion kit documentation for installation instructions.
Figure 2-6 shows a typical installation of a 68-pin Ultra Wide internal-
to-external cable.
68-Pin Ultra Wide
External SCSI
Connector
Figure 2-6. Installing an Internal-to-External SCSI Port Expansion Cable
2-8
68-Pin Ultra Wide
Internal-to-External
SCSI Cable
68-Pin Ultra Wide
Internal SCSI
Connector