Removable Media Blank - HP ProLiant ML570 Generation 2 Maintenance And Service Manual

Removal and Replacement Procedures
2. Push the sliding release button to unlock the blank (1).
3. Pull the drive blank out from the drive cage (2).
Figure 2-59: Removing the drive blank
Reverse steps 1 through 3 to replace a drive blank.

Removable Media Blank

To remove a removable media blank:
1. Remove the front bezel door (tower model only). Refer to "Removing the Front Bezel
Door (Tower Model Only)" in this chapter.
2. Remove the access panel. Refer to "Removing the Access Panel" in this chapter.
2-68
HP ProLiant ML570 Generation 2 Server Maintenance and Service Guide