Extending The Server From The Rack; Removing The Server From The Rack - HP ProLiant ML570 Generation 2 Maintenance And Service Manual

Removal and Replacement Procedures

Extending the Server from the Rack

To extend the server from the rack:
1. Loosen the front panel thumbscrews that secure the server to the front of the rack (1).
2. Extend the server until the server rail release latches engage (2).
Figure 2-26: Extending the server from the rack

Removing the Server from the Rack

2-38
WARNING: To reduce the risk of personal injury or damage to the equipment, observe
local occupational health and safety requirements and guidelines for manual material
handling.
WARNING: Before lifting the server, remove all hot-plug power supplies to reduce
weight.
WARNING: The server is very heavy, up to 66 kg (146 lb). To reduce the risk of
personal injury or damage to the equipment:
•
Remove all hot-plug power supplies to reduce the weight of the server before
lifting it.
•
Observe local occupational health and safety requirements and guidelines for
manual material handling.
•
Use more than one person to lift and stabilize the server.
HP ProLiant ML570 Generation 2 Server Maintenance and Service Guide