HP ProLiant ML570 Generation 2 Maintenance And Service Manual page 94

Diagnostic Tools
Use the following tools to diagnose problems, test hardware, and monitor and manage server
operations.
Table 3-1: Diagnostic Tools
Tool
Array Diagnostics Utility (ADU)
Automatic Server Recovery-2
(ASR-2)
Diagnostics Utility
Insight Manager 7
3-2
Description
ADU is designed to run on all HP
systems that support HP array
controllers. ADU collects information
about the array controllers in the
system and generates a list of
detected problems.
ASR-2 automatically restarts the
server after a catastrophic operating
system failure.
With ASR-2, you have multiple
recovery options:
Available Recovery provides
•
software error recovery and
environmental recovery.
Unattended Recovery logs the
•
error information to the IML,
resets the server, and tries to
restart the operating system.
Diagnostics Utility tests and verifies
operation of HP hardware. If the
utility finds a hardware failure, it
isolates the replaceable part, if
possible.
Insight Manager 7 is a client/server
application used to remotely manage
HP hardware in a network
environment. Insight Manager 7
reports hardware fault conditions
(both failure and pre failure) and
collects data for reporting and
graphing.
HP ProLiant ML570 Generation 2 Server Maintenance and Service Guide
How to run the tool
For a list of HP servers that support
www.hp.com.
ADU, visit
For a complete list of ADU error
messages, refer to the HP Servers
Troubleshooting Guide.
Run RBSU and set ASR-2 to enable
this tool.
Access Diagnostics Utility when
POST detects a system
configuration error. For a complete
list of POST error messages, refer to
the HP Servers Troubleshooting
Guide. Diagnostics Utility can be run
from the SmartStart CD or
downloaded from www.hp.com
For more information on viewing and
printing the event list, refer to the
Management CD, the HP Insight
Manager User Guide or the HP
ProLiant ML570 Generation 2 Server
Setup and Installation Guide.
.
continued