Table of Contents
Advertisement
This chapter provides subassembly/module-level removal and replacement procedures for
HP ProLiant ML570 Generation 2 servers. After completing all necessary removal and
replacement procedures, run the Diagnostics program to be sure that all components operate
properly.
You need the following items for some procedures:
•
Torx T-15 tool
•
Torx T-10 tool
•
Diagnostics Utility from the SmartStart CD
•
Wrist strap
Safety Considerations
Before performing service procedures, review the following safety information.
Electrostatic Discharge
A discharge of static electricity can damage static-sensitive devices or microcircuitry. Proper
packaging and grounding techniques are necessary precautions to prevent damage. To
prevent electrostatic damage:
•
Transport products in static-safe containers such as conductive tubes, bags, or boxes.
•
Keep electrostatic-sensitive parts in their containers until they arrive at static-free
stations.
•
Cover workstations with approved static-dissipating material. Use a wrist strap connected
to the work surface and properly grounded (earthed) tools and equipment.
•
Keep work area free of nonconductive materials such as ordinary plastic assembly aids
and foam packing.
•
Be sure that you are properly grounded (earthed) when touching a static-sensitive
component or assembly.
•
Avoid touching pins, leads, or circuitry.
•
Use nonconductive field service tools.
HP ProLiant ML570 Generation 2 Server Maintenance and Service Guide
Removal and Replacement Procedures
2
2-1
Advertisement
Table of Contents
