Opening The Hot-Plug Door - HP ProLiant ML570 Generation 2 Maintenance And Service Manual

Removal and Replacement Procedures

Opening the Hot-Plug Door

To open the hot-plug door:
1. Extend the server from the rack. Refer to "Extending the Server from the Rack" in this
chapter.
2. Locate the hot-plug door key. The key is located inside the front bezel door on the tower
model servers (1) or in a bag attached to the rear handle on the rack model servers (2).
Fig 2-2: Locating the hot-plug door and front bezel door keys
2-6
HP ProLiant ML570 Generation 2 Server Maintenance and Service Guide