Setting Up Privacy Zones - HIKVISION RH5xx Series User Manual

Setting up Privacy Zones

Privacy zones can be setup to mask off sensitive or private areas in the field of view of a
camera.
To setup privacy zones:
1. Enter the Privacy Zones menu, shown in Figure 50 by going to Main Menu >
Camera Setup > Privacy Zones.
Figure 50. Privacy Zones Menu
2. Select the camera to setup privacy zones in using the camera drop down menu
on the upper left of the menu. If all cameras are to be configured with the
same settings, select All Cameras from the list.
3. Click Enable Privacy Zones.
4. Up to four privacy zones can be used per camera and are shown using four
different colors, yellow, green, blue and pink. Using the mouse, click and drag
out rectangular boxes defining the desired zones.
5. You may clear a privacy zone at any time by clicking on the corresponding
Clear Zone button or Clear All button to clear all zones.
6. Select the Save button to save the privacy zones settings and select Exit to
return to the previous menu. Selecting the Exit button without clicking Save
will quit out of the menu without saving settings.
Setting up Privacy Zones 73