HIKVISION RH5xx Series User Manual page 43

1. Enter the Advanced Schedule Configuration menu, shown in Figure 24 by
going to Main Menu > Recording Configuration > Advanced Schedule Config-
uration.
Figure 24. Advanced Schedule Configuration Menu
2. Select the camera to configure from the camera drop down menu. If all the
cameras are to be configured with the same settings, select All Cameras from
the list.
3. Check the Enable checkbox to enable the recording schedule. If the checkbox
is unchecked, the recording schedule will be disabled.
4. Select a day between Monday to Sunday to configure schedule for.
5. Setup time periods for schedule. If the 24HR checkbox is checked, recording
will occur over the entire day. To setup multiple time periods, uncheck 24HR
and enter the Start and Stop Time for the selected day. The start and stop time
are listed using a 24 hr cycle (i.e. 18:00 is equivalent to 6:00pm).
6. Select recording type under Type for selected day of the week. Recording type
includes Continuous for continuous recording or On Event for recording when
an event is triggered (i.e. from detected motion) for the selected time period.
7. If there are scheduling errors detected, such as overlapping time periods, error
messages such as those shown in Figure 25 will appear.
Figure 25. Advanced Schedule Configuration Error Messages
36 Record Settings