Table of Contents
Advertisement
Managing System
Upgrading the System Firmware
The system firmware for your DVR can be updated from a USB storage device.
To update the system firmware:
1. Enter the Firmware Upgrade menu, shown in Figure 59 by going to Main
Menu > Maintenance > Firmware Upgrade.
Figure 59. Firmware Upgrade Menu
2. Connect the USB storage device to a USB port on the DVR.
3. Click the Refresh button. The contents of the USB storage device will be shown
on the screen.
4. Select the firmware file. The firmware file is named digicap.mav.
5. Click the Upgrade button to upgrade the DVR. The DVR will automatically
reboot after the upgrade is completed. If you do not wish to upgrade at this
point, click the Cancel button.
86
DVR Management
Advertisement
Table of Contents
