Table of Contents
Advertisement
3. Enter settings for Server Address, DVR Domain Name, User Name, and
Password.
6. If a central monitoring station that is compatible with your DVR is available,
you may enter its settings under Central Station IP and Central Station Port.
7. Enter the Client Port and HTTP Port to be use with your DVR. The client
port designates the port to be use with the client software while the HTTP
port refers to the one to be use with the built-in Web Server.
8. After all settings have been configured, you may test the connection by click-
ing the Test Connection button. A confirmation message, similar to the one
shown in Figure 37 will pop up if the network is working properly.
Figure 37. Test Connection Confirmation
9. Select the Save button to save the network settings and select Exit to return to
the previous menu. Selecting the Exit button without clicking Save will quit
out of the menu without saving settings.
Configuring Network Settings
53
Advertisement
Table of Contents
