Table of Contents
Advertisement
2. Select the Trigger Actions tab, this will take you to the Trigger Actions sub-
menu, shown in Figure 44.
Figure 44. Trigger Actions Sub-Menu.
3. Select the alarm input to configure in the Alarm Input No. drop down menu
on the upper left of the menu. If all alarm inputs are to be configured with the
same settings, select All from the list.
4. Select the Trigger Action for the external alarm input device. Normal Open or
Normal Close can be selected.
5. Select the PTZ Actions (only if a PTZ camera is configured on the DVR) to run
when the alarm input is triggered. Only one PTZ action can be selected per
alarm input.
6. Select the Actions to run when the alarm input is triggered. Multiple actions
can be selected per alarm input. The actions available includes:
•
Sound Audio Warning: DVR will sound an audio warning if alarm is trig-
gered.
•
Pop-up Image on Monitor: DVR will show the corresponding channel
that is associated with the trigger input.
•
Notify Surveillance Center: DVR will notify surveillance center when
alarm is triggered.
•
Send Email: DVR will send an email out to the designated recipients when
alarm is triggered.
•
Trigger Alarm Output: DVR will trigger alarm output when input is trig-
gered. Selecting this option will enable the Alarm Output list, where the
output to trigger can be selected.
64
System Configuration
Advertisement
Table of Contents
