Table of Contents
Advertisement
Restoring Default Settings
To restore factory default settings to your DVR:
1. Enter the Factory Default menu, shown in Figure 60 by going to Main Menu >
Maintenance > Factory Default.
Figure 60. Factory Default Menu
2. Select the OK button to restore factory defaults or select the Cancel button to
return to the previous menu.
Note:
Network information such as IP address, subnet mask and gateway will not be
restored.
Exporting & Importing Configuration
Configuration information from your DVR can be exported to a USB storage device and
imported into another DVR. This will allow you to efficiently setup the same configuration
on numerous DVRs.
To export DVR configuration:
Managing System
87
Advertisement
Table of Contents
