Table of Contents
Advertisement
•
EDIT/IRIS+ Button: The EDIT/IRIS+ button is used to edit text fields.
When editing text fields, it will also function as a Backspace button to delete
the character in front of the cursor. On checkbox fields, pressing the EDIT/
IRIS+ button will tick the checkbox. In PTZ Control mode, the EDIT/IRIS+
button opens up the iris of the camera. In Playback mode, it can be used to
generate video clips for backup.
•
MENU/WIPER Button: Pressing the MENU/WIPER button will return the
user to the Main menu (after successful login). Pressing and holding the
button for 5 seconds will turn off audible key beep. The MENU/WIPER
button will also bring up Sensitivity Interface settings. In PTZ Control
mode, the MENU/WIPER button wills tart the wiper (if applicable).
•
F1/LIGHT Button: The F1/LIGHT button when used in a list field will
select all items on the list. In PTZ Control mode, it will turn on/off PTZ
light.
•
F2/AUX Button: The F2/AUX button is used to cycle through tab pages. It
will also bring up the Channel & OSD Position settings.
•
MAIN/SPOT/ZOOM- Button: The MAIN/SPOT/ZOOM- button is used to
switch between main and spot output. In PTZ Control mode, it can be used
to zoom the camera out.
•
PREV/FOCUS- Button: The PREV/FOCUS- button is used to switch
between single screen and multi-screen mode. In PTZ Control mode, it is
used to adjust the focus in conjunction with the A/FOCUS+ button. It can
also be used to select entire masked areas, such as in Motion Detection and
Privacy Mask menus.
•
PTZ/IRIS- Button: The PTZ/IRIS- button is used to enter the PTZ Control
mode. When in the PTZ Control mode, it is used to close the iris of the PTZ
camera.
7. DIRECTION/ENTER Buttons:
•
DIRECTION Buttons: The DIRECTION buttons are used to navigate
between different fields and items in menus. In Playback mode, the Up and
Down button is used to fast-forward and rewind recorded video. The Left
and Right button will select the next and previous day of recordings. In
Preview mode, these buttons can be used to cycle through channels.
•
ENTER Button: The ENTER button is used to confirm selection in any of
the menu modes. It can also be used to tick checkbox fields. In Playback
mode, it can be used to play or pause the video. In Single Play mode, press-
ing the ENTER button will advance the video by a single frame.
8
Introduction
Advertisement
Table of Contents
