Configuring An Advanced Recording Schedule - HIKVISION RH5xx Series User Manual

6. Select the start and stop time for each day of the week. The start and stop time
are listed using a 24 hr cycle (i.e. 18:00 is equivalent to 6:00pm).
7. Select Recording Type for each day of the week. Recording type includes
Continuous for continuous recording or On Event for recording when an event
is triggered (i.e. from detected motion) for the selected time period.
8. Check the Enable Audio checkbox if you would like to enable audio recording
along with the video. Audio can only be recorded if an audio source (such as a
microphone) is connected to the DVR.
9. Select the Save button to save the schedule settings and select Exit to return to
the previous menu. Selecting the Exit button without clicking Save will quit
out of the menu without saving settings.
Note:
On Event recordings are recordings that are triggered from motion detection and/
or from an external alarm (See Configuring Alarms and Exceptions on page 61).
Note:
If an event occurs during Continuous recording, the frame rate will automatically
switch to that set for Event recording.

Configuring an Advanced Recording Schedule

An advanced recording schedule allows you to schedule multiple time periods per day for
recording as oppose to a single time period of a quick recording schedule. Setting up an
advanced recording schedule will allow you to further conserve disk space by recording
only during the time periods you would like to record at.
To setup an advanced recording schedule:
Configuring Settings for Recording 35