Configuring Cameras; Adding And Removing Ip Cameras - HIKVISION RH5xx Series User Manual

Configuring Cameras

Adding and Removing IP Cameras

Depending on the model of your DVR, IP cameras can be setup and used in conjunction
with regular analog cameras. Before configuring IP cameras, please ensure the network
settings for your DVR is properly setup.
To manage IP cameras:
1. Enter the Add/Remove Cameras menu, shown in Figure 47 by going to Main
Menu > Cameras Setup > Add/Remove Cameras.
Figure 47. Add/Remove Cameras
2. Select the IPC tab.
3. Click the Discover button to automatically detect connected IP cameras on the
network.
4. If the detected IP cameras and DVR are not on the same subnet, you can mod-
ify the cameras' IP Address, Manage Port, Protocol and Administrator
Password.
5. Click the Test Connection button to test if the IP camera was connected suc-
cessfully or not.
6. Click the Add button to add the IP camera to the Added Cameras list, as shown
in Figure 48.
70 Camera Management