Table of Contents
Advertisement
CSG14 Series Gigabit Converter Switch
Installation and User Guide (05/08)
3.7 CSG14H and P Series, DC-powered, -48VDC, 24VDC and 12VDC Installation
This section describes the proper connection of the -48VDC leads (or 24VDC,
12VDC leads) to the DC power terminal block on
the Magnum CSG14H hardened media converter
(as shown in Figure). The DC terminal block on
the Magnum CSG14H is located on the left side of
the unit and is equipped with three (3) screw-down
lead posts. The power terminals are identified as
positive (+) and negative (-), and they are floating
inside the unit so that the user if desired may
ground either of the terminals. The chassis is "earth" or ground (GND).
www GarrettCom com
.
.
47
Advertisement
Table of Contents
