Table of Contents
Advertisement
CSG14 Series Gigabit Converter Switch
The single fiber port on the CSG14 is multi-mode with an SC connector or small
form-factor connector (LC single-mode).
The external DC power plug connector and/or "jack" and the internal DC input
terminal is provided on the rear of the unit.
2.3 Frame Buffering and Latency
The Magnum CSG14 Series Converter Switches are store-and-forward switches.
Each frame (or packet) is loaded into the Switch's memory and inspected before forwarding
can occur. This technique ensures that all forwarded frames are of a valid length and have
the correct CRC, i.e. they are good packets. This eliminates propagation of bad packets,
enabling all of the available bandwidth to be used for valid information.
While other switching technologies such as "cut-through" or "express" impose
www GarrettCom com
.
.
Installation and User Guide (05/08)
22
Advertisement
Table of Contents
