CS14, CSN14 Series Converter Switches
Installation and User Guide (02/06)
single-mode). The Full Duplex/Half Duplex ("F- H") manual switch provided underneath
the fiber port allows the user to fix the fiber port at Full or Half Duplex mode as required.
The external DC power plug connector and/or "jack" and the internal DC input
terminal is provided on the rear of the unit.
2.3 Frame Buffering and Latency
The Magnum CS14 and CSN14 Series Converter Switches are store-and-forward
switches. Each frame (or packet) is loaded into the Switch's memory and inspected before
forwarding can occur. This technique ensures that all forwarded frames are of a valid
length and have the correct CRC, i.e. they are good packets. This eliminates propagation of
bad packets, enabling all of the available bandwidth to be used for valid information.
www GarrettCom com
.
.
23