Mounting The Fs-4 (Macintosh) - Focus FS-4 User Manual

Mounting the FS-4 (Macintosh)

Step 1: Start the Mac computer and connect the FS-4's
port to the computer using a standard 6-pin to 6-pin FireWire
cable.
When mounted, the FS-4 should appear on the computer's
desktop as shown below:
The FS-4 appears as a FAT32 volume with a PC label. This is not
always the case on Mac OSX however.
Step 2: Locate the FS-4 on the desktop and open it up.
Step 3:
Open the folder with the most recent date code (for example,
"20050127-110345-01"). It should look similar to the
following:
Before Connecting FS-4 Pro to a Computer
If clips have been assigned to a Reel folder: perform an Organize
Reels before connecting the unit to a computer.
Using the FS-4 with a Computer
COMPUTER I/O
37