Powering The Fs-4; Connecting The Fs-4 To Ac Power - Focus FS-4 User Manual

Quickstart

Powering the FS-4

• The FS-4 operation without a battery installed.
To operate the FS-4 without a battery installed, connect the
unit to an AC power source.
• Before operating the FS-4 with battery power.
It is first necessary to fully charge the battery. An uncharged
battery, typically takes 2-3 hours to charge.

Connecting the FS-4 to AC Power

Attach the AC power cord to the FS-4 (with or without battery
installed). The FS-4 is immediately ready for operation.
To do this, connect the AC power as follows:
Battery Pack
Step 1:
Plug the cord from the power supply into the bottom of the FS-4.
Step 2: Connect the line cord to the rectangular power supply
(International models only).
Step 3: Plug the line cord or AC adapter into an electric outlet.
16
DC Power Port
DC Cable