FireStore Functions
Retro Disk Record Mode
The Retro Disk mode records video in a continuous loop to a
user-defined portion of disk space. Pressing Record
begins active recording. The Retro Disk session is appended to the
beginning of the new clip. The result is a set of clips beginning with
the cached video and continuing with the newly recorded video.
•
When calculating the amount of hard disk space needed for a
Retro Disk record session, always include additional space
beyond the recording requirements. The added space depends
on the length of the loop.
•
Loops less than 60 minutes, need an additional 1 minute of
unused disk space.
•
Loops 60 minutes and greater, require an additional 9 minutes
and 13 seconds of unused disk space.
•
When looping less than one hour, Retro Disk records the
loop in a series of 1 minute clips.
•
Retro Disk is available in Normal, Syncro Slave and Tapeless
control modes.
•
When Retro Disk is set, the symbols
appear in the FS-4 Pro display.
48
RETRO DISK
00:00
HH:MM
FS-4 Pro only
This line is not active:
reference only.
BACK
L
seamlessly
(Record and L)