Setting Up Master And Slave Fs-4 - Focus FS-4 User Manual

Setting Up Master and Slave FS-4

1
Master FS-4
STOP 1 - 001
COUNTER
2
00 : 00 : 00 : 00
DISK 1
SYNC DISP LOCK
Step 1:
Connect the camcorder to the master FS-4,
using the supplied FireWire cable.
Step 2:
Master
Power on unit.
Go to the
Step 3:
Slave
Power on the unit
Go to the
Step 4: Connect the FS-4s through their
a 6-pin to 6-pin FireWire cable.
Step 5:
Master
Begin recording or playback using the master FS-4.
000min
menu screen and enable
HDD Mode
screen and enable
HDD Mode
Use DD Drive Mode when Connecting to a PC
It is important to take the master FS-4 out of USE EXT FS-4
mode before attempting to connect to a computer.
To do this, select DD DRIVE from the HDD Mode screen.
This returns the unit to hard disk mode.
FireStore Functions
4
Slave FS-4
CONNECT
COMPUTER THEN
ENABLE BYPASS
SUCCESS
EXIT
DV I/O
DD DRIVE
Computer I/O
3
connector
.
USE EXT FS-4
.
connectors using
53