Power On Button
The Power ON button provides two functions.
•
Power ON FS-4
•
Reset FS-4
•
FS-4 first must be powered on.
•
Hold down the
•
Power OFF
Hold down the
power off, the FS-4 beeps, indicating that it is turning off.
Navigation Buttons
Use these buttons to navigate through the FS-4 menus. The
navigation buttons are
Transport Control Buttons
Back
Search
Use these buttons to control FS-4 playback and record functions.
You usually operate these transport buttons while on the HOME
Screen.
Record
Press this button once when the FS-4 is in
into
REC-PAUSE
button while recording, causes the current clip to close and a new clip is
created without dropping any frames. This button is the only button that
has a red legend on the front panel.
Power On
button
OFF
,
Left
Right
Record
Back
STOP
Index
Power Off
. Press it again to start recording. Pressing the Record
button for two seconds.
for three (3) seconds. During
,
,
, and
Up
Down
Forward
Index
mode to put the FS-4
Stop
Quickstart
.
Select
Forward
Search
7