Unpacking; Features - Focus FS-4 User Manual

Introduction

Unpacking

Verify that the FS-4 has the following items:
1. FS-4 unit
2. Power supply with cable and connector to the FS-4
3. Power cable (international only)
4. Belt clip
5. Firewire cable, four foot long, 6-pin to 4-pin
6. User guide
7. Removable Li-Ion battery pack
Missing or Damaged Components
If there are missing or damaged items, contact Focus Enhancements
Support for assistance.
Email: Support@focusinfo.com
Telephone: 763-398-1658

Features

FS-4 Features
All FS-4 models offer the following features:
• Tapeless acquisition
Especially equipped camcorders permit the use of Direct To
Edit (DTE) Technology to record directly from a camcorder
while shooting and without the need of a tape.
• True DTE Technology
When shooting is finished, connect the FS-4 to a computer
and instantly be ready to edit in the timeline.
Files are recorded to disk as RawDV, AVI Type 1, AVI Type
2, Matrox AVI, Canopus AVI, or QuickTime. In addition, 24p
AVI Type 2 and QuickTime are available in NTSC mode.
• Fast and Efficient Editing
When shooting is finished, mount the FS-4 to a Mac or PC
editing system like a typical FireWire hard disk drive.
Transfer clips to your NLE's media drive at up to 400 Mbps
or edit instantly in real-time using the FS-4 as your media
source.
2