Record And Playback With The Fs-4; Power On The Fs-4 - Focus FS-4 User Manual

Quickstart

Record and Playback with the FS-4

Before using the FS-4, set up the unit as outlined in the following
sections:

Power On the FS-4 .............................................................. 20

Select HDD Recorder Mode ................................................ 21
Select a DV/HD File Format ................................................ 22
Set Time and Date .............................................................. 23
Record With the FS-4 .......................................................... 25
Manual Recording ............................................................... 26
Syncro Slave Recording ...................................................... 27
Playback on the FS-4 .......................................................... 28
The values set in these procedures are fixed and persist through
power cycles. To change them, repeat the steps outlined above.

Power On the FS-4

Step 1:
Press the
Power ON
Transport
Buttons
OFF (STOP)
To power OFF,
hold down for 3-5 seconds.
20
button for two seconds and release it.
Power ON
Navigation
Buttons