Dismounting The Fs-4 (Windows) - Focus FS-4 User Manual

Using the FS-4 with a Computer

Dismounting the FS-4 (Windows)

When finished working with the FS-4 and the computer, it is
necessary to dismount FS-4 from the system
To do dismount the FS-4:
Step 1: Click the
of the Windows task bar as shown below.
Unplug or Eject Hardware Icon
Step 2: Next, the computer system prompts to
FS-4. This begins the dismount process.
Step 3: Select the message and click on it.
The computer dismounts the FS-4 and then displays a message
that it is now safe to remove the unit.
36
Dismount FS-4 Before Powering Off
It is important to dismount the FS-4 from the Windows system
BEFORE powering down the unit.
Safely Remove Hardware
(Safely Remove Hardware)
icon at the bottom right side
the connected
Remove