Table of Contents
Advertisement
MRIE
X'05'
Generate no sense:
This method instructs the target to report informational exception conditions
by returning a CHECK CONDITION status on any command. The sense
key shall be set to NO SENSE and the additional sense code shall indicate
the cause of the informational exception condition.
(setting
The command that has the CHECK CONDITION shall complete without
prohibited)
error before any informational exception condition may be reported.
X'06'
Only report informational exception condition on request:
This method instructs the target to report informational exception(s)
information. To find out about information exception conditions the
Application Client polls the target by issuing an unsolicited REQUEST
SENSE command. The sense key shall be set to NO SENSE and the
additional sense code shall indicate the cause of the information exception
condition.
X'07'- X'0B'
Reserved
X'0C'- X'0F'
Reserved (Vendor Specific)
h.
Interval timer
This field indicates the period in 100 millisecond increments for reporting
that an informational exception condition has occurred. The target does not
report informational exception conditions more frequency than the time
specified by the "Interval Timer" field and as soon as possible after the timer
interval has elapsed.
After the informational exception condition has been reported the interval
timer is restarted. A value of zero in the "Interval Timer" field indicates that
the target shall only report the informational exception condition one time. A
value of X'FFFFFFFF' in the "Interval Timer" field indicates the timer
interval is vendor specific.
In the implementation, actual period unit to be used in reporting information
exception condition is minute. Therefore a value is rounded-up to minute as
shown below. a value of zero and X'FFFFFFFF' in the interval timer field
indicates that drive report the information exception condition once.
A value of TIMER INTERVAL field
0, 0xFFFFFFFFh
1-600
601-1200
1201-1800
0xFFFFFE11-0xFFFFFFFE
C141-C009
Table 4.31 MRIE (2/2)
Descriptor
Table 4.32 Interval timer
Actual time interval (minutes)
Drive reports the informational exception condition once
4.1 Control/Sense Commands
1
2
3
7158279
4-67
Advertisement
Table of Contents
