Table of Contents
Advertisement
Sense Data and Error Recovery Methods
5.2 INIT Error Recovery Methods (Recommended)
When a single command or a series of linked commands are not terminated with a
status reported, the INIT should execute error recovery processing corresponding
to the state in which the command was terminated. Here, the procedure for
analyzing the command execution termination state and recommended procedures
for error recovery processing executed by the INIT in accordance with the results
are explained.
5.2.1 Termination status analysis and error recovery methods
Figure 5.1 shows a model of the INIT's general processing flow from issuing of
the command until reception of the termination status.
Command issue
END
status received ?
No
Timeout ?
Yes
See item (3).
Figure 5.1 Analysis of the termination status
5-14
Yes
GOOD
TASK FULL
PRESERVATION
CONFLICT
Yes
Normal end
No
Yes
To item (1)
No
Yes
To item (2)
No
To Section 5.2.2
C141-C009
Advertisement
Table of Contents
