Fujitsu MAU3147RC SERIES Technical Manual page 172

Serial attached scsi interface specifications
Hide thumbs Also See for MAU3147RC SERIES:
Table of Contents

Advertisement

Command Specifications
b
Connect time limit
This parameter specifies the maximum period of time for which the open
state of the connection can be maintained before the TARG starts the closing
processing as a multiple of 100 µs.
This value of the IDD is infinite. This parameter cannot be changed by
INITs.
The IDD ignores the value specified for this parameter.
c.
Maximum burst size
This parameter specifies the maximum number of transfer bytes that the
TARG transfers in the data frames between the OPEN processing for the
address frame and the execution of the DONE-CLOSE primitive as a multiple
of 512 bytes.
The IDD ignores the value specified for this parameter.
d.
Burst size during the initial connection
When the ENABLE FIRST BURST bit of the command frame is set to "1,"
this parameter specifies the maximum number of write data bytes that an
INIT can transfer without transferring XFER_RDY frames immediately after
transfer of a command frame. The number of bytes is specified in this
parameter as a multiple of 512 bytes.
Since the IDD does not support the ENABLE FIRST BURST function for
command frames, this parameter is ignored if specified.
4-36
C141-C009

Advertisement

Table of Contents
loading

Table of Contents