Table of Contents
Advertisement
l.
ATTACHED SMP TARGET PORT
Reports the SMP TARGET value received from the INIT with an IDENTIFY
address frame.
m. SAS ADDRESS
Reports the port SAS address of the IDD.
- port SAS address (Port-A):
- port SAS address (Port-B):
n. ATTACHED SAS ADDRESS
Reports the SAS address received from the INIT with an IDENTIFY address
frame.
o. ATTACHED PHY IDENTIFIER
Reports the phy address received from the INIT with an IDENTIFY address
frame.
p. INVALID DWORD COUNT
Reports the cumulative count of INVALID DWORD errors detected in a
sequence of SP_WDS other than the PHY RESET sequence.
q. RUNNING DISPARITY ERROR COUNT
Reports the cumulative count of RUNNING DISPARITY errors received
except in the PHY RESET sequence.
r.
LOSS OF DWORD SYNCHRONIZATION COUNT
Reports the cumulative count of the LINK RESET sequences of a PHY
RESET sequence and PHY LOST DWORD SYNCHRONIZATION.
s.
PHY RESET PROBLEM COUNT
Reports the cumulative count of PHY RESET sequence failures.
C141-C009
4.1 Control/Sense Commands
5CCC CCCX XXXX XXX 2
5CCC CCCX XXXX XXX 3
C: Company ID
X: Serial number for WWN
4-117
Advertisement
Table of Contents
