Show Auto Qos - Cisco Catalyst 3750 Command Reference Manual

show auto qos

show auto qos
Use the show auto qos user EXEC command to display the initial configuration that is generated by the
automatic quality of service (auto-QoS) feature.
Syntax Description interface [interface-id]
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.1(14)EA1
Usage Guidelines The show auto qos [interface [interface-id]] command displays the initial auto-QoS configuration; it
does not display any user changes to the configuration that might be in effect. Use the show
running-config privileged EXEC command to display the auto-QoS configuration and the user
modifications.
To display information about the QoS configuration that might be affected by auto-QoS, use one of these
commands:
•
•
•
•
•
•
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Catalyst 3750 Switch Command Reference
2-244
show auto qos [interface [interface-id]] [ | {begin | exclude | include} expression]
Modification
This command was introduced.
show mls qos
show mls qos maps cos-dscp
show mls qos interface [interface-id] [buffers | queueing]
show mls qos maps [cos-dscp | cos-input-q | cos-output-q | dscp-cos | dscp-input-q |
dscp-output-q]
show mls qos input-queue
show running-config
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
(Optional) Display auto-QoS information for the specified port or
for all ports. Valid interfaces include physical ports.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified
expression.
Expression in the output to use as a reference point.
78-16181-01