Cisco Catalyst 3750 Command Reference Manual page 709

Appendix C Catalyst 3750 Switch Show Platform Commands
vct [asic number | port number
[asic number]]
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.1(11)AX
Usage Guidelines
You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
78-16181-01
Display the VLAN compression table entries for the specified
ASIC or for the specified port and ASIC. The keywords have these
meanings:
asic number—(Optional) Display information for the
•
specified ASIC. The range is 0 to 1.
port number—(Optional) Display information for the
•
specified port and ASIC number. The range is 0 to 27, where
0 is the supervisor and 1 to 25 are the ports.
(Optional) Display begins with the line that matches the
expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified
expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
show platform port-asic
Catalyst 3750 Switch Command Reference
C-23