Clear Setup Express - Cisco Catalyst 3750 Command Reference Manual

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands

clear setup express

Use the clear setup express privileged EXEC command on the switch stack or on a standalone switch
to exit Express Setup mode without saving the current configuration.
Syntax Description This command has no arguments or keywords.
Defaults
No default is defined.
Command Modes Privileged EXEC
Command History Release
12.1(14)EA1
Usage Guidelines You can use the clear setup express command to exit Express Setup mode. For example, if you activate
Express Setup and then decide to connect to the switch through the console port instead of through an
Ethernet port, enter the clear setup express command. The switch exits Express Setup mode. The IP
address 10.0.0.1 is no longer valid on the switch, and your connection using this IP address is ended.
This command is available only when the switch is in Express Setup mode.
Examples This example shows how to exit Express Setup mode:
Switch# clear setup express
You can verify that the switch has exited Express Setup mode by entering the show express setup
privileged EXEC command.
Related Commands Command
setup express
show setup express
78-16181-01
clear setup express
Modification
This command was introduced.
Description
Enables Express Setup mode.
Displays if Express Setup mode is active.
Catalyst 3750 Switch Command Reference
clear setup express
2-43