Show Ipc - Cisco Catalyst 3750 Command Reference Manual

show ipc

show ipc
Use the show ipc user EXEC command to display Interprocess Communications Protocol (IPC)
configuration, status, and statistics on a switch stack or a standalone switch.
Syntax Description mcast
appclass
groups
status
nodes
ports
open
queue
rpc
session
all
rx
tx
verbose
status
cumulative
| begin
| exclude
| include
expression
Command Modes User EXEC
The session {all | rx | tx} [verbose] keywords are available only in privileged EXEC mode.
Catalyst 3750 Switch Command Reference
2-308
show ipc {mcast {appclass | groups | status} | nodes | ports [open] | queue | rpc | session {all |
rx | tx} [verbose] | status [cumlulative]} [ | {begin | exclude | include} expression]
Display the IPC multicast routing information.
Display the IPC multicast application classes.
Display the IPC multicast groups.
Display the IPC multicast routing status.
Display participating nodes.
Display local IPC ports.
(Optional) Display only the open ports.
Display the contents of the IPC transmission queue.
Display the IPC remote-procedure statistics.
Display the IPC session statistics (available only in privileged EXEC
mode).
Display all the session statistics (available only in privileged EXEC
mode).
Display the sessions statistics for traffic that the switch receives
(available only in privileged EXEC mode).
Display the sessions statistics for traffic that the switch forwards
(available only in privileged EXEC mode).
(Optional) Display detailed statistics (available only in privileged
EXEC mode).
Display the status of the local IPC server.
(Optional) Display the status of the local IPC server since the switch
was started or restarted.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
78-16181-01