Show Platform Tb - Cisco Catalyst 3750 Command Reference Manual

Hide thumbs Also See for Catalyst 3750:
Table of Contents

Advertisement

Appendix C
Catalyst 3750 Switch Show Platform Commands

show platform tb

Use the show platform tb privileged EXEC command to display platform-dependent trusted-boundary
information during a stack master change to a new stack master.
Syntax Description
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.1(14)EA1
Usage Guidelines
You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show platform tb command:
Switch# show platform tb
Print TB sub-block information
(Fa1/0/2) device:(Cisco phone)
/* current interfaces with TB enabled, and the trust device type */
Current master switch:(Yes)
/* Is this switch the current master switch? */
New elected master
/* Is the master switch-over occurred and this is the new master switch? */
Master ready
/* Is the Master switch in ready state? */
HULC TB process on
/* Is the TB platform process currently running? */
CDP stable timer ON
/* Is the CDP stable timer running? After the CDP stable timer expired, CDP neighbors of
all the TB enabled interfaces will be verified to make sure the replacement of IP phone
and PC did not happen during the master switch-over. */
78-16181-01
show platform tb [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
:(No)
:(No)
:(No)
:(No)(360 secs)
Catalyst 3750 Switch Command Reference
show platform tb
C-33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents