Udld Messages - Cisco Catalyst 3750-X Message Manual

Chapter 2 Message and Recovery Procedures
Error Message TCAMMGR-3-REGMASK_ERROR: invalid cam region [dec] mask [dec] pair.

UDLD Messages

Error Message UDLD-0-STOPPED:UDLD process stopped:[chars].
Error Message UDLD-3-UDLD_IDB_ERROR: UDLD error handling [chars] interface [chars].
Error Message UDLD-3-UDLD_INTERNAL_ERROR: UDLD internal error [chars].
OL-9772-05
A caller attempted to install an entry with an invalid mask for the region. Only a
Explanation
predetermined set of masks is allowed in a region. The first [dec] is the region, and the second [dec]
is the mask.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
The UDLD process stopped because it cannot read the unique system identifier that is
Explanation
being used by UDLD. The system identifier is used to identify the device that is sending the UDLD
packets. [chars] is the UDLD process name.
Reload the switch by using the reload privileged EXEC command. If the
Recommended Action
message appears again, copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
A software error occurred in UDLD processing associated with a specific interface. The
Explanation
first [chars] is the event, and the second [chars] is the interface.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
A software check failed during UDLD processing. [chars] is a description of the internal
Explanation
error.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
1-7.
1-7.
1-7.
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
UDLD Messages
"Error
"Error
"Error
2-123