Cisco Catalyst 3750-X Message Manual page 77

Chapter 2 Message and Recovery Procedures
Error Message PLATFORM_ENV-1-RPS_SYS_POWER_GOOD: [chars].
Explanation
Recommended Action
Error Message PLATFORM_ENV-1-RPS_THERMAL_CRITICAL: RPS temperature has reached
critical threshold.
Explanation
cannot function normally.
Recommended Action
temperature in the room.
Error Message PLATFORM_ENV-1-TEMP: Abnormal temperature detected.
Explanation
Recommended Action
check the switch temperature by entering the show env all privileged EXEC command.
Error Message PLATFORM_ENV-2-RPS_THERMAL_WARNING: RPS temperature has reach warning
threshold.
Explanation
RPS can function normally until the temperature reaches the critical threshold.
Recommended Action
Error Message PLATFORM_ENV-3-RPS_BACKOFF_FAILED: [chars].
Explanation
switch instructs it to no longer provide power to the switch. [chars] is the error message.
Recommended Action
Error Message PLATFORM_ENV-3-RPS_CHANGE_TO_STANDBY: [chars].
Explanation
[chars] is the error message.
Recommended Action
OL-9772-05
The RPS 2300 system power state changed to good. [chars] is the error message.
No action is required.
The temperature sensor value in the RPS 2300 has reached the critical threshold. It
The external temperature is too high. Immediately reduce the room
An abnormal temperature is detected.
Ensure that ambient temperature is not too high. If the message appears again,
The temperature sensor value in the RPS 2300 has reached the warning threshold. The
The external temperature is high. Reduce the room temperature.
The RPS 2300 is continuing to back up the switch even though the command on the
No action is required.
The RPS 2300 state changed to standby. It can no longer provide power to the switch.
No action is required.
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
PLATFORM_ENV Messages
2-59