Cisco Catalyst 3750-X Message Manual page 44

Hide thumbs Also See for Catalyst 3750-X:
Table of Contents

Advertisement

DOT1X_SWITCH Messages
Error Message DOT1X_SWITCH-5-ERR_VLAN_EQ_VVLAN: Data VLAN [dec] on port [chars]
cannot be equivalent to the Voice VLAN AuditSessionID [chars]
Explanation
voice VLAN. [dec] is the VLAN, the first [chars] is the port, and the second [chars] is the session ID.
Recommended Action
that they are not the same.
Error Message DOT1X_SWITCH-5-ERR_VLAN_INTERNAL: Attempt to assign internal VLAN
[dec] to 802.1x port [chars] AuditSessionID [chars]
Explanation
is used internally and cannot be assigned to this port. [dec] is the VLAN, the first [chars] is the port,
and the second [chars] is the session ID.
Recommended Action
Error Message DOT1X_SWITCH-5-ERR_VLAN_INVALID: Attempt to assign invalid VLAN [dec]
to 802.1x port [chars] AuditSessionID [chars]
Explanation
is out of range. [dec] is the VLAN, the first [chars] is the port, and the second [chars] is the session
ID.
Recommended Action
Error Message DOT1X_SWITCH-5-ERR_VLAN_NOT_FOUND: Attempt to assign non-existent or
shutdown VLAN [chars] to 802.1x port [chars] AuditSessionID [chars]
Explanation
in the VLAN Trunking Protocol (VTP) database. [dec] is the VLAN, the first [chars] is the port, and
the second [chars] is the session ID.
Recommended Action
Error Message DOT1X_SWITCH-5-ERR_VLAN_ROUTED_PORT: Attempt to assign VLAN [dec] to
routed 802.1x port [chars]
Explanation
[dec] is the VLAN, and [chars] is the port.
Recommended Action
configuration so that no VLAN is assigned.
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
2-26
An attempt was made to assign a data VLAN to an 802.1x port that is the same as the
Change either the voice VLAN or the 802.1x-assigned VLAN on the port so
An attempt was made to assign an invalid VLAN to an 802.1x port. The VLAN specified
Assign a different VLAN.
An attempt was made to assign an invalid VLAN to an 802.1x port. The VLAN specified
Update the configuration to use a valid VLAN.
An attempt was made to assign a VLAN to an 802.1x port, but the VLAN was not found
Make sure that the VLAN exists and is not shut down, or use another VLAN.
An attempt was made to assign a VLAN to a routed 802.1x port, which is not allowed.
Change the port mode so that it is no longer a routed port, or change the
Chapter 2
Message and Recovery Procedures
OL-9772-05

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 3560-xCatalyst 3560-eCatalyst 3750-e

Table of Contents