Udld Messages - Cisco 3750 - Catalyst EMI Switch Message Manual

Chapter 2 Message and Recovery Procedures
Error Message TCAMMGR-3-REGMASK_ERROR: invalid cam region [dec] mask [dec] pair.

UDLD Messages

This section contains UniDirectional Link Detection (UDLD) messages.
Error Message UDLD-0-STOPPED:UDLD process stopped:[chars].
Error Message UDLD-3-UDLD_IDB_ERROR: UDLD error handling [chars] interface [chars].
78-16184-04
This message means that a caller attempted to install an entry with an invalid mask for
Explanation
the region. Only a predetermined set of masks is allowed in a region. The first [dec] is the region,
and the second [dec] is the mask.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
This message means that the UDLD process stopped because it cannot read the unique
Explanation
system identifier that is being used by UDLD. The system identifier is used to identify the device
that is sending the UDLD packets. [chars] is the UDLD process name.
Reload the switch by using the reload privileged EXEC command. If the
Recommended Action
problem persists, copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case
with the TAC, or contact your Cisco technical support representative, and provide the representative
with the gathered information. For more information about these online tools and about contacting
Cisco, see the "Error Message Traceback Reports" section on page
This message means that a software error occurred in UDLD processing associated with
Explanation
a specific interface. The first [chars] is the event, and the second [chars] is the interface.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case
with the TAC, or contact your Cisco technical support representative, and provide the representative
with the gathered information. For more information about these online tools and about contacting
Cisco, see the "Error Message Traceback Reports" section on page
1-5.
1-5.
1-5.
Catalyst 3750 Switch System Message Guide
UDLD Messages
"Error
2-91