Bspatch Messages - Cisco Catalyst 3750-X Message Manual

BSPATCH Messages

BSPATCH Messages
Error Message BSPATCH-1-RELOAD: System will reboot to activate newly patched Boot
Loader.
Error Message BSPATCH-1-PATCHED: Boot Loader patch ([chars]) installed.
Error Message BSPATCH-3-FAILED: Failed to install Boot Loader patch ([chars]).
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
2-10
The switch automatically reboots after the boot loader is patched.
Explanation
If this message recurs, copy it exactly as it appears on the console or in the
Recommended Action
system log. Research and attempt to resolve the error by using the Output Interpreter. Use the Bug
Toolkit to look for similar reported problems. If you still require assistance, open a case with the
TAC, or contact your Cisco technical support representative, and provide the representative with the
gathered information. For more information about these online tools and about contacting Cisco, see the
"Error Message Traceback Reports" section on page
A boot loader patch installed successfully. [chars] is the SDRAM refresh timer register
Explanation
setting.
If this message recurs, copy it exactly as it appears on the console or in the
Recommended Action
system log. Research and attempt to resolve the error by using the Output Interpreter. Use the Bug
Toolkit to look for similar reported problems. If you still require assistance, open a case with the
TAC, or contact your Cisco technical support representative, and provide the representative with the
gathered information. For more information about these online tools and about contacting Cisco, see the
"Error Message Traceback Reports" section on page
The switch did not apply a boot loader patch. [chars] is the SDRAM refresh timer
Explanation
register setting.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Chapter 2 Message and Recovery Procedures
1-7.
1-7.
1-7.
"Error
OL-9772-05