Udld Messages - Cisco 3845 - Security Bundle Router Manual

UDLD Messages

Error Message TCAMMGR-3-MOVE_ERROR: cam entry move from index [int] to index [int]
failed.
Error Message TCAMMGR-3-REGION_ERROR: cam region [dec] is invalid.
Error Message TCAMMGR-3-REGMASK_ERROR: invalid cam region [dec] mask [dec] pair.
UDLD Messages
Error Message UDLD-0-STOPPED:UDLD process stopped:[chars].
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
2-74
Explanation A CAM entry could not be moved from one index to another. [int] is the index value.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the
page 1-5.
The CAM region is not valid. [dec] is the region.
Explanation
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the
page 1-5.
A caller attempted to install an entry with an invalid mask for the region. Only a
Explanation
predetermined set of masks is allowed in a region. The first [dec] is the region, and the second [dec]
is the mask.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
your Cisco technical support representative with your information. For more information about these
online tools and about contacting Cisco, see the
page 1-5.
The UniDirectional Link Detection (UDLD) process stopped because it cannot read the
Explanation
unique system identifier that is being used by UDLD. The system identifier is used to identify the
device that is sending the UDLD packets. [chars] is the UDLD process name.
Reload the switch by using the reload privileged EXEC command. If the
Recommended Action
problem persists, copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still need assistance, open a case with the TAC, or provide
Chapter 2 Messages and Recovery Procedures
"Error Message Traceback Reports" section on
"Error Message Traceback Reports" section on
"Error Message Traceback Reports" section on
OL-23408-01