Wireless 802.11 General Settings - Intermec PC23 User Manual

Appendix A — Specifications and Default Settings

Wireless 802.11 General Settings

Setting
Network Name
(SSID)
Network Type
Roaming
Power Mode
Channel
Hidden SSID
154
This section describes the 802.11 general settings. To view these
settings:
• From the printer Main Menu, select Settings > Communications
> Wireless 802.11 > General.
• From the printer web page, click the Configure tab >
Communications > Wireless 802.11.
Description
Defines the wireless network. To communicate, all access
points and wireless devices must have the same network
name, which is case-sensitive.
Selects the radio behavior of the printer. Ad Hoc mode
allows the printer to communicate directly with another
printer. Infrastructure mode allows the printer to
communicate through an access point.
Controls the roaming inclination of the printer. The
higher the level, the less inclined the printer is to switch
access points based on the printer received signal
strength (RSSI).
Select the power management setting for the radio.
Constant Awake provides the highest throughput but
draws the most power. Power Saving conserves the most
power but provides the lowest throughput. Fast Power
Saving turns off components when they are not being
used to draw less current.
Sets the common channel that radios in Ad Hoc mode
use to transfer data. Range is 1 to 14.
Determines if the radio is allowed to look for SSIDs that
have been hidden to prevent unauthorized devices from
connecting to the wireless nework.
PC23 and PC43 Desktop Printer User Manual
Default
INTERMEC
Infrastructure
Off
Constant Awake
1
Disable