Chapter 2 — Set Up the Printer
Load Media for the Label Dispenser
46
To use the label dispenser accessory for printing, you print labels on
self-adhesive label stock with a liner. As each label is printed, the label
is automatically peeled from the liner and is presented at the front of
the printer for manual removal.
1 Pull one or both of the printer latches toward the front of the
printer and lift the printer lid.
2 If there is an empty media core in the media compartment, remove
the core.
3 If you are going to load the same size media, continue with the next
step.
If you are using large rolls of media stored outside the printer, such
as in an external media holder, feed the media through the external
media feed slot.
PC23 and PC43 Desktop Printer User Manual