Connect the Printer to an Ethernet Network
PC23 and PC43 Desktop Printer User Manual
After you install the optional Ethernet module in the printer, you can
connect it to your wired network. For information on installing this
accessory, see the PC23d, PC43d, and PC43t Ethernet Module Installation
Instructions.
1 Connect an Ethernet cable to the Ethernet port on the rear of the
printer and to your network.
If your network uses a DHCP server to assign IP addresses, the IP
address appears in the lower left corner of the screen after the
printer connects to the network.
•
For an icon printer, connect to the printer using PrintSet and
print a configuration label. The label includes the IP address.
If you are not using a DHCP server to automatically assign IP
addresses to devices in your network, you must set a static IP
address and other network information manually. Continue with
the next step.
Chapter 3 — Connect the Printer
75