Ethernet Settings - Intermec PC23 User Manual

Chapter 3 — Connect the Printer

Ethernet Settings

76
2 For a non-DHCP network (using a static IP address):
• For an LCD printer, from the Main Menu select Settings >
Communications > Ethernet and change the settings as
needed.
• For an icon printer, configure the Ethernet settings through
PrintSet.
This section describes the Ethernet IPv4 and IPv6 settings. To view
these settings:
• From the printer Main Menu, select Settings > Communications
> Ethernet.
From the printer web page, click the Configure tab >
•
Communications > Ethernet.
Setting Description
(IPv4) IP Specifies how the printer obtains an IP
Assignment address.
Method
(IPv4) IP Address Specifies the unique network-level address
that is assigned to each device in a TCP/IP
network (IPv4).
Subnet Mask Specifies a number that defines the range
of IP addresses that can be used in a
TCP/IP network.
Default Router Specifies the IP address of a router that is
used when a device sends a packet to
another subnet or to an unknown
destination.
DHCP Response Specifies if the printer receives DHCP
responses by broadcast or unicast.
(IPv6) IP Specifies how the printer obtains an IP
Assignment address (for IPv6 networks).
Method
(IPv6) IP Address Specifies the unique network-level address
that is assigned to each device in a TCP/IP
network (IPv6).
PC23 and PC43 Desktop Printer User Manual
Default
DHCP
0.0.0.0
0.0.0.0
0.0.0.0
Broadcast
Automatic
Automatic